Trailhunter Heritage Grill installed on ORP (TRD Off-Road Premium)

[Ericd6972]

Well, here it is the Trailhunter Heritage Grille on our ORP. I kept the factory lower half and plugged the camera hole in the new grille with the Rave off road Camera bracket and dummy camera. Bought the matte black overlays but not sure im going to use them since we love the look of the bronze. Took me roughly an hour and a half from start to finish. Lots of screws lots of clips, if you're not mechanically inclined, I do not recommend trying this yourself.

 

[Guangming]

cost?

 

[Ericd6972]

cost?

$180 for the grille from Toyota

 

[Maximus4R]

Well, here it is the Trailhunter Heritage Grille on our ORP. I kept the factory lower half and plugged the camera hole in the new grille with the Rave off road Camera bracket and dummy camera. Bought the matte black overlays but not sure im going to use them since we love the look of the bronze. Took me roughly an hour and a half from start to finish. Lots of screws lots of clips, if you're not mechanically inclined, I do not recommend trying this yourself.

This. Looks. Amazing.
Pulling the trigger on this now. I think you did the research work in another thread but just to make sure, is this the right part number?

Grille Sub Assembly Rad - Toyota (53101-35160)

 

[Ericd6972]

This. Looks. Amazing.
Pulling the trigger on this now. I think you did the research work in another thread but just to make sure, is this the right part number?

Grille Sub Assembly Rad - Toyota (53101-35160)

Yep! That's the one. If you need the dummy camera and bracket to plug hole you can find at Raveoffroad.com. It was $70 shipped for the 2 3D printed pieces that I needed to slightly modify because the holes were no where close. It's nice once it's together but I could have probably rigged something up that would have worked just as good.

 

[4RunnerStan]

I want to do this so bad but I'll figure out a way to end up getting the 4R towed to a shop in the end for like taking off an engine mounting bracket lmao. Also, I don't want to pay the $200 or whatever it would be in labor to a shop to do it so I'm going to convince myself that I like the grille it comes with better lolol

 

[Ericd6972]

I want to do this so bad but I'll figure out a way to end up getting the 4R towed to a shop in the end for like taking off an engine mounting bracket lmao. Also, I don't want to pay the $200 or whatever it would be in labor to a shop to do it so I'm going to convince myself that I like the grille it comes with better lolol

It takes some patience that's for sure! It's actually ridiculous how much of a pain it is just to get the factory one out.

 

[4RunnerStan]

It takes some patience that's for sure! It's actually ridiculous how much of a pain it is just to get the factory one out.

I really do want to change the headlights tho and I heard (but don't know if it's true) that the grille has to come off for that also, and if so maybe I do it as a birthday present to myself in a few years

 

[Ericd6972]

I really do want to change the headlights tho and I heard (but don't know if it's true) that the grille has to come off for that also, and if so maybe I do it as a birthday present to myself in a few years

You would just need to take the front end off to that and its is pretty easy to do so. Then the headlights are right there

 

[4RunnerStan]

You would just need to take the front end off to that and its is pretty easy to do so. Then the headlights are right there

Oh dope good to know, thanks!

 

[Timmbo23]

Nice job and I like that you have the red Toyota tow/recovery hooks!

 

[Ericd6972]

Nice job and I like that you have the red Toyota tow/recovery hooks!

Thanks!

 

[jofe]

@Ericd6972 this looks awesome! I see that the camera is in the same position, does this mean that the camera only changes position if you get the light bar as well?
Did you just have to connect the 3d printed bracket to the new grill? And what modification did you have to do to make that work?

So many questions sorry haha

 

[4R4Life]

Looks great! did you change the horns too?

 

[4RunnerWasStolen!]

I want to do this so bad but I'll figure out a way to end up getting the 4R towed to a shop in the end for like taking off an engine mounting bracket lmao. Also, I don't want to pay the $200 or whatever it would be in labor to a shop to do it so I'm going to convince myself that I like the grille it comes with better lolol

If a shop would do this (and do it without breaking anything) for $200, I would be the first in line.